Meishi Multifunctional Adhesive (Putty)

MEX multifunctional adhesive (putty)
MT-1RMT-2R

Product type:
◆This product uses a variety of inorganic minerals and special waterproof adhesives
The reinforcing agent is the base material. All materials and additives are non-toxic sources
The composition of materials meets the requirements of green products.

Scope of application:
◆Widely suitable for all kinds of ceramic tiles, glazed tiles, mosaics etc. old
Refurbishment of the base layer and new and old cement mortars that need to be leveled and scraped
Plastering the grassroots.

Features:
◆Adhesion is super strong, and the load capacity is very good, long-term use will not crack;
◆No shrinkage during drying process, good leveling performance;
◆Scratch at will, excellent Constructability;
◆The paint surface has excellent water resistance and washing resistance, good air permeability, and is a new high-tech
Air-permeable and water-tight floor paint;
◆Paint brush etc. tools can be cleaned before drying.
◆Excellent water resistance, will not fall off when exposed to water for a long time;
◆High alkali resistance, can prevent the precipitation of alkaline substances;
◆It is an excellent base layer for various coatings. (Except alkyd resins);
◆Create a new layer for the next coating, and turn it over after playing the tile surface.
New key role.

Construction method:
◆To paint the wall, it must be flat, stable, clean and dry, free of dust, grease, mildew or other attachments. The new cement wall must be dry for at least one month or so due to high water content and free alkaline substances. After that, construction can be carried out to remove the cheap cement particles. Do not mix with lime water or Other paint;
◆The moisture content of the base surface is less than 10%, the PH value is less than 10, and the putty should be even and smooth. The putty should be as thin as possible. After drying for 1-2 days, sand it with fine sandpaper to smooth the scratches. If necessary, you can scrape the second putty, or even the third and fourth putty, to make the whole wall smooth.

Construction Conditions:
◆Temperature between 5-38℃, relative humidity<80%

Drying time
◆Surface dryness: 2hs (temperature20℃, relative humidity65%)
◆Hard work: 24 hours (temperature20℃, relative humidity65%)
Storage conditions
◆Paint cans should be tightly closed and sealed to avoid direct sunlight and stored in a cool place.、In a dry place, the storage temperature is above 0℃ and below 35℃.

Shelf life
◆In the case of a document that meets the above-mentioned requirements, the order will be available from the date of birth.
The effective shelf life is 12 months.