宁波美仕高洁涂料有限公司

Ningbo meishi gaojie paint Co., Ltd.

PRODUCTS

Ningbo Meishi Gaojie Paint Co., Ltd. is a large-scale Sino-foreign joint venture paint manufacturer

Homepage
/
Product Center
/
Powder coating
>
Bonding series powder coating

Bonding series powder coating

Product ID: D-009
Category: Powder coating
Bonding processing technology is used to make the coating have various golden and silver metallic glittering effects, such as local gold and mirror silver. Various colors and glosses with metallic effects can be provided, or customized according to customer specific requirements.

1.product description：Bonding processing technology is used to make the coating have various golden and silver metallic glittering effects, such as local gold and mirror silver. A variety of colors and lusters with metallic effects can be provided, or customized according to customer specific requirements.

2.Application field：This product includes all our company's systems, which are widely used in indoor and outdoor surface decoration with metallic effects.

3.Powder performance：
Chemical type   Epoxy type ，Epoxy/polyester type，Pure Polyester type
 Particle size   Suitable for Static electricity spray gun or friction gun spray
 Proportion   1.3-1.6g/cm3
      Storage conditions   30℃ below, cool, ventilated and dry
 Shelf life   12 months

4.Application conditions：
spray gun   Static electricity or friction spray gun
thickness   60-80μm,The smallest50μm，maximum150μm
Static electricity枪Voltage   60-80kv
   Distance between gun and workpiece   15-25cm
Curing conditions   200℃*8-10min (MT)    180℃*10-15min(MT)
   Can be adjusted according to customer requirements

5.Pretreatment：
According to different Substrate and coating quality requirements, use the corresponding   Pretreatment type
      1.Zinc phosphating  （The smallest6μm）
    2.Iron-based phosphating  （The smallest6μm）
3.No surface chemical treatment, poor corrosion resistance, and other related physical and chemical properties are poor

6.Detection board：
Substrate   Phosphated galvanized sheet
Size and thickness   100mm*150mm*0.6mm
Paint filmthickness   50-70μm
Curing conditions   200℃*10min(MT)(MTWorkpiece temperature） 
  *The following data is based on the above-mentioned conditions to make samples, and obtained through rigorous testing

7.Mechanical behavior：
luster  ISO2813,BS3900,GB/T9754-18 According to customer's technical requirements
Shock  GB/T1732-93,AS3715,2.8  30-50kg.cm
bending  GB/1185-88,AS1580,402.1  Pass 2-5mm
Adhesion  B/T9286-88，1mm cross cut  pass100/100,0 level
Cupping  Erichsen,ISO1520 Pass 3-7mm
Pencil hardness  GB/T6739-86,Mitsubishi  Pass H-2H
*Usually high-gloss products have better mechanical behavior than low-gloss products

8.Chemical resistance and weather resistance：
Salt spray experiment  GB/T1771-91,1000h  ﹤2mm 
Heat resistance test  GB/T1740-79(89),1000h  No bubbles, slightly loss of light
Acid resistant  3%CH3COOH,240h   No bubbles, no damage on the surface
Alkali resistance  3%NaOH,240h   No bubbles, no damage on the surface
Solvent resistant  MEK(Butanone）24hOther  No bubbles, no damage on the surface

9.Health and safety：
This series of coatings is a non-toxic product, but inhalation of dust should be avoided during use. It is recommended that operators wear appropriate dust masks and glasses. If possible, avoid long-term contact between skin and powder coating

10.Other：
1.This technical data is for user's reference. The specific indicators are tested under the specified conditions and only represent the general features of this series of products.
       2.This technical data does not include powder with special effects. If you need to know the details of the powder, please refer to our company's color chart or ask our company's sales staff.

  
1
Previous
None
Next
Antibacterial series powder coating

Similar other products

Low temperature curing series powder coating
Low temperature curing series powder coating
Epoxy powder coating
Epoxy powder coating
Epoxy/polyester powder coating
Epoxy/polyester powder coating
Conventional polyester weather resistant powder coating
Conventional polyester weather resistant powder coating
Polyester powder coating for outdoor aluminum profile
Polyester powder coating for outdoor aluminum profile
High temperature resistant powder coating
High temperature resistant powder coating
Transparent powder coating for rim
Transparent powder coating for rim
Antibacterial series powder coating
Antibacterial series powder coating

Feedback

Please ask your questions and we will get back to you as soon as possible!

Username used for comment:
客户留言
Description:

© 2020 Ningbo meishi gaojie paint Co., Ltd. |  浙ICP备2020033550号-1  |   Powered by www.300.cn

Order：86-574-63317777(Xie Manager)  ·  Fax：86-574-63318887 ·  Administrative：86-574-63317888 / 86-574-63317801(Jing Manager) ·  Purchase：86-574-63317098(Cheng Manager)